Laser Microphone: Difference between revisions

From PC5214 wiki
Jump to navigation Jump to search
Line 33: Line 33:
A low pass filter is a filter that passes frequencies lower than a selected cutoff frequency and attenuates signals with frequencies higher than the cutoff. Low-pass filters provide a smoother form of a signal, removing the short-term fluctuations and leaving the longer-term trend.  
A low pass filter is a filter that passes frequencies lower than a selected cutoff frequency and attenuates signals with frequencies higher than the cutoff. Low-pass filters provide a smoother form of a signal, removing the short-term fluctuations and leaving the longer-term trend.  


====RC filter====
The cutoff frequency of a low-pass filter is given by  
The cutoff frequency of a low-pass filter is given by  


Line 39: Line 40:
where <math> R </math> is the value of the resistance and <math> C </math> is the value of the capacitance.
where <math> R </math> is the value of the resistance and <math> C </math> is the value of the capacitance.


===RC filter===
====Butterworth Filter====

Revision as of 12:29, 17 April 2022

A laser spot illuminating a vibrating surface should move along with it, and tracking the motion of the spot should theoretically allow us to retrieve some of the information regarding the vibrations of the surface. If a loud enough sound causes the surface to vibrate, this should theoretically be enough for the transmission of audio information through visual means.

Team Members

A0166927N | Marcus Low Zuo Wu

A0171267A | Nicholas Chong Jia Le

Methods and Requirements

Using a photodiode / array of photodiodes, we attempt to record audio by measuring the signal from a laser reflecting off a surface near the sound.

Due to the nature of the setup mentioned, we require a decently dim environment to minimise noise, a visible light laser (does not need to be high powered but needs to be decently collimated), an optical bench, a set of photodiodes that can detect the laser light and produce a signal, and an electronic setup that allows us to capture and export the signal from the photodiodes.

Background

Level (logarithmic quantity)

A power level is a logarithmic quantity used to measure power, power density or sometimes energy, with commonly used unit decibel (dB).

Power level

Level of a power quantity, denoted LP, is defined by

where

  • P is the power quantity;
  • P0 is the reference value of P.

Field (or root-power) level

The level of a root-power quantity (also known as a field quantity), denoted LF, is defined by

where

  • F is the root-power quantity, proportional to the square root of power quantity;
  • F0 is the reference value of F.

Low-pass filter

A low pass filter is a filter that passes frequencies lower than a selected cutoff frequency and attenuates signals with frequencies higher than the cutoff. Low-pass filters provide a smoother form of a signal, removing the short-term fluctuations and leaving the longer-term trend.

RC filter

The cutoff frequency of a low-pass filter is given by

where is the value of the resistance and is the value of the capacitance.

Butterworth Filter